|
|
|
Forum Newbie
Group: Forum Members
Last Login: Friday, March 26, 2010 1:20 PM
Posts: 2,
Visits: 9
|
|
New Flex 3000, using an external ATU, Vibroplex and Winkeyer connected to Flex front panel.
The transmitted Cw does not follow the audio I hear from Winkeyer speaker, even holding just the dot key on. Reduced power to 5 Watts, tried a common ground cable for both Flex and computer. Would welcome suggestions. Robert (g0who)
|
|
|
|
|
Forum Newbie
Group: Forum Members
Last Login: Friday, January 07, 2011 7:46 AM
Posts: 1,
Visits: 1
|
|
| Check the CPU utilization %. Are you are using the internal iambic keyer of the Flex3K? Had similar problem running Flex3k on a single core eMachine (2GHz Intel Celeron). CPU went to 100% when iambic keying and output went to pot! Tried dual core laptop (vista), all is well. Switched desktop to a quad core HP machine and all is much better. CPU <20%. Single core machine worked ok with external keyer but, quiescent CPU utilization was ~70% leaving no head room for other processes.
|
|
|
|